Hair Stays Wrapped.
Wet strands can twist around holes, mesh or posts, leaving you to pull, pick and peel them away by hand.
THE DIFFERENCE IS IN THE CLEANUP
Many catchers stop hair at the drain but leave wet strands wrapped around holes, mesh or posts. MagClean is designed around what happens next.
Wet strands can twist around holes, mesh or posts, leaving you to pull, pick and peel them away by hand.
Lift out the magnetic collector, open the two halves, and use one half to slide the collected hair away.
NO HAND-PULLING REQUIRED
Lift it out, open the magnetic halves, then use one half to slide the collected hair away - your fingers stay on the collector.
ONE INSERT. FOUR FUNCTIONS.
Hair collection, guided flow, between-shower odour control and simple removal work together in one compact insert.
For compatible walk-in shower floor drains. The bottom valve does not replace a properly installed plumbing trap.
QUICK FIT CHECK
Remove the drain cover or insert, then check these four points. Drain type alone does not determine fit.
The existing drain cover or service insert can be removed safely without disturbing fixed plumbing parts.
The approx. 78 mm silicone disc needs continuous support around the opening. This can be a flat ledge or a continuous sloped shoulder that supports the disc securely so it cannot drop through.
Allow at least 50 mm of unobstructed space below the support surface so the bottom flap has room to move freely.
The passage below the support surface must be at least 32 mm wide so the approx. 31.5 mm insert body can pass through freely without force.
Not sure? Use Chat for a free written Photo Fit Check. Send a clear photo, the clear passage width in mm and the unobstructed usable depth below the support surface in mm. The check is optional and not a fit guarantee.
Fit is not guaranteed. Do not force the insert or remove fixed plumbing parts.
SIMPLE INSTALLATION
No drilling or full drain replacement, provided your shower floor drain passes the fit check.
Remove the existing shower drain cover or other insert only if it is designed to be removable.
Confirm a stable support ledge, a clear passage for the insert body, enough usable depth and no fixed obstructions.
First complete a clean, dry placement check without force. If it fits and sits securely, run one small water test to confirm free drainage. If it does not fit, sits insecurely or restricts flow, remove it and stop using it. This safety check does not limit our 30-Day Satisfaction Guarantee.
When hair collects, lift out the centre piece, release the hair, rinse the collector and place it back.
QUESTIONS, ANSWERED
MagClean is a removable insert for compatible walk-in shower floor drains; it is not a complete drain replacement or a bathtub stopper. It does not fit every drain. You need a removable cover or service insert, stable support for the approx. 78 mm top disc around the opening, at least 32 mm of clear passage, at least 50 mm of unobstructed depth below the support surface with room for the bottom flap to move freely, and no fixed crossbars, posts, sealed cores or other obstructions. Check each drain separately.
Start with a clean, dry placement check and never force the insert. If it does not physically fit or sit securely, do not run water; remove it and stop using it. If the dry check is satisfactory, run one small water test. If that test shows restricted flow or insecure seating, remove it and stop using it. These safety steps do not limit the return policy: you may return MagClean for any reason by contacting us within 30 days of delivery. We cover standard return shipping, charge no restocking fee and do not require original packaging. Do not mail a product that has contacted wastewater or is materially contaminated unless we instruct you to do so. The pre-purchase Photo Fit Check is optional and not a fit guarantee.
1 Pack includes one complete MagClean insert. Buy 2, Get 1 Free (3 Pack) includes three complete inserts total. Use one insert per compatible shower drain and check each drain separately.
MagClean uses plastic, silicone and stainless-steel components with permanent magnets. The magnets hold the removable collector halves together; they do not attract hair. The insert's physical structure and water flow help guide loose hair toward the collector.
No. MagClean helps catch loose shower hair earlier, but no drain accessory can prevent every clog or fix an existing blockage, damaged pipe or other plumbing problem. Complete the clean, dry fit check first. Only if that check is satisfactory should you run one small water test. If flow is restricted or the insert does not sit securely, remove it and stop using it. This does not limit the 30-Day Satisfaction Guarantee.
No. The flexible top disc and gravity flap may help limit odour and small-insect pathways between showers, but results depend on the drain and plumbing. MagClean does not replace a properly installed P-trap or any required plumbing.
Inspect it regularly and clean it whenever hair becomes visible. Lift out the collector, open the two magnetic halves, use one half to slide away the caught hair, rinse and place it back. Frequency depends on shower use and hair load.
For Australian orders, we offer free standard shipping to eligible addresses. Orders are normally processed within 1–2 business days. Estimated transit time to Australia is 7–12 business days after dispatch. Processing time is separate from transit time. These are estimates, not guaranteed delivery dates. For other destinations available at checkout, please see our Shipping Policy.
You may return MagClean for any reason by contacting us within 30 days of delivery; you do not need to provide a return reason. We may ask for your order number and contact details only to verify the purchase and arrange safe handling. Opening the package, completing a clean, dry placement check, or trying MagClean under normal household use does not disqualify the return. We cover standard return shipping, charge no restocking fee and do not require original packaging.
Contact us before mailing anything because the company address is not the return centre.
Do not mail a product that has contacted wastewater or is materially contaminated unless we instruct you to do so; we may arrange another safe return or disposal method.
A 1 Pack return covers the complete 1 Pack. For a Buy 2, Get 1 Free (3 Pack), an any-reason return must include all three inserts and their supplied product parts. Original packaging is not required. After the authorised complete return is received and checked—or after we confirm in writing that no physical return is required and our handling instructions are completed—we refund the actual product price paid for the returned pack, after any discounts, in the original transaction currency to the original payment method. Partial one- or two-insert any-reason returns are not offered. Individual defective, damaged, incomplete or incorrect inserts are handled separately and do not require returning a complete 3 Pack.
We may deny claims involving fraud, deliberate damage or repeated policy abuse.
The one-year limited warranty covers qualifying defects in materials or workmanship under normal household use from delivery.
Choose one MagClean insert for each compatible shower drain, and check each drain separately.
